Time | Presentation |
---|---|
10:00–10:40 a.m. | Chemical Reactions on Bimetal Catalysts Revealed with Ambient Pressure Surface Techniques and Hot Electron Detection J. Y. Park; KAIST/IBS, Daejeon, KOREA, REPUBLIC OF. |
10:40–11:00 a.m. | Composite Electrolytes from Cold Sintering for Lithium Metal Batteries W. LEE1, C. Randall2, E. Gomez1; 1Chemical Engineering, The Pennsylvania State University, University Park, PA, 2Materials Science and Engineering, The Pennsylvania State University, University Park, PA. |
11:00–11:20 a.m. | CO2 oxidation from Mo2CTx (MXene) to molybdenum oxide/carbon composites for lithium ion battery anode materials J. Park1, A. Byeon1, C. Hatter2, C. Ahn3, Y. Gogotsi2, J. Lee1; 1Department of Chemical and Biomolecular Engineering, KAIST, Daejeon, KOREA, REPUBLIC OF, 2Department of Materials Science and Engineering, Drexel University, Philadelphia, PA, 3National Nanofab Center (NNFC), Daejeon, KOREA, REPUBLIC OF. |
11:20–11:40 a.m. | Energy materials derived from Bijel templates K. McDevitt, D. R. Mumm, A. Mohraz; Chemical Engineering and Materials Science, University of California, Irvine, CA. |
11:40 a.m.–noon | Impact of polymer depletant on battery slurry performance S. L. Morelly, M. H. Tang, N. J. Alvarez; Chemical and Biological Engineering, Drexel University, Philadelphia, PA. |
1:20–1:40 p.m. | Self-assembling redox mediators that lower charge recombination during light energy harvesting N. Abbott, T. Smith; Department of Chemical and Biological Engineering, University of Wisconsin-Madison, Madison, WI. |
1:40–2:00 p.m. | Using conjugated block copolymers to examine chain length effects on exciton dissociation M. P. Aplan, E. D. Gomez; Chemical Engineering, The Pennsylvania State University, University Park, PA. |
2:00–2:20 p.m. | Colloidal engineering of trimodal nanoporous adhesive coatings of algae and latex for highly efficient light harvesting A. D. Wallace, M. C. Flickinger, O. D. Velev; Chemical and Biomolecular Engineering, North Carolina State University, Raleigh, NC. |
2:20–2:40 p.m. | Characterizing the molecular weight of conjugated polymers used in energy applications R. Fair1, E. Gomez1,2; 1Materials Science and Engineering, The Pennsylvania State University, University Park, PA, 2Chemical Engineering, The Pennsylvania State University, University Park, PA. |
3:20–3:40 p.m. | Modeling Adsorption Processes in Energy Systems and Resource Recovery S. Yiacoumi, A. Ladshaw, C. Tsouris; Georgia Institute of Technology, Atlanta, GA. |
3:40–4:00 p.m. | Gas-Hydrate equilibrium in porous media P. Taboada-Serrano1, Y. Zhang2; 1Chemical Engineering, Rochester Institute of Technology, Rochester, NY, 2Microsystems Engineering PhD Program, Rochester Institute of Technology, Rochester, NY. |
4:00–4:20 p.m. | Generating a state diagram of Langmuir film of quantum dots C. Nguyen, J. Weimer; Chemistry, The University of Alabama in Huntsville, Huntsville, AL. |